OBDHut

OBDHut

P3455

Moderate

Cylinder 7 Exhaust Valve Control Circuit Low

What Does P3455 Mean?

The PCM has detected a voltage signal lower than expected in the cylinder 7 exhaust valve control circuit. This indicates a short to ground or excessive current draw in the exhaust valve deactivation solenoid circuit.

Common Causes

40%

Short to ground in wiring harness to cylinder 7 exhaust valve solenoid

Wiring Harness
Connector

35%

Failed cylinder 7 exhaust valve control solenoid with internal short circuit

Valve Solenoid

15%

Damaged or corroded connector causing short to ground

Connector
Connector Pins

10%

PCM driver circuit failure

PCM

Diagnostic Steps

1

Step 1: Disconnect cylinder 7 exhaust valve solenoid connector and measure solenoid resistance; compare to specifications

2

Step 2: With solenoid disconnected, check for continuity between control wire and ground; should be infinite resistance (no continuity)

3

Step 3: Inspect wiring harness for damage, particularly where it contacts engine block or hot components

4

Step 4: Examine connector terminals for corrosion, moisture, or damage that could cause intermittent shorts

5

Step 5: If wiring and solenoid are intact, test PCM driver circuit output; may require PCM replacement if driver circuit is damaged

Estimated Repair Cost

$150 - $850

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P3455 mean?

The PCM has detected a voltage signal lower than expected in the cylinder 7 exhaust valve control circuit. This indicates a short to ground or excessive current draw in the exhaust valve deactivation solenoid circuit.

What causes P3455?

The most common cause of P3455 (Cylinder 7 Exhaust Valve Control Circuit Low) is: Short to ground in wiring harness to cylinder 7 exhaust valve solenoid

How much does it cost to fix P3455?

Typical repair costs for P3455 range from $150 to $850, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P3455?

Safe to drive short distances. May cause rough idle, reduced fuel economy, and possible misfires on cylinder 7.

How do I diagnose P3455?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P3455 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Variable Valve Timing/Cylinder Deactivation System

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.