What Does P2718 Mean?
The TCM has detected an open circuit in the pressure control solenoid D control circuit. This means no electrical continuity exists between the TCM and solenoid, preventing operation.
Common Causes
40%
Broken or disconnected wire in solenoid D control circuit
30%
Failed pressure control solenoid D with internal open circuit
20%
Disconnected or severely corroded connector at solenoid D
7%
Blown fuse in transmission control circuit
3%
Failed TCM with open output driver circuit
Diagnostic Steps
1
Step 1: Check transmission control circuit fuses for blown fuses or poor connections
2
Step 2: Inspect solenoid D connector for complete disconnection or severely damaged pins
3
Step 3: Perform continuity test from TCM connector to solenoid D connector (circuit should be continuous)
4
Step 4: Test resistance of pressure control solenoid D; infinite resistance indicates open circuit
5
Step 5: If wiring and solenoid test good, suspect failed TCM output driver
Estimated Repair Cost
$175 - $850
Parts + labor, varies by vehicle and location
The TCM has detected an open circuit in the pressure control solenoid D control circuit. This means no electrical continuity exists between the TCM and solenoid, preventing operation.
The most common cause of P2718 (Pressure Control Solenoid "D" Control Circuit/Open) is: Broken or disconnected wire in solenoid D control circuit
Typical repair costs for P2718 range from $175 to $850, depending on the vehicle, location, and whether you do it yourself or go to a shop.
Will cause improper transmission operation and likely limp mode activation. Vehicle may be stuck in one gear or experience severe shifting problems.
Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P2718 to identify the root cause.
OBDHut Mobile App
Scan codes directly from your car with the OBDHut app.
Coming Soon
Quick Info
Category
Powertrain
System
Automatic Transmission
Difficulty
Type
Generic (SAE)
Recommended Tools
OBD2 Scanner
A quality scan tool helps you read codes, view live data, and clear faults.
