OBDHut

OBDHut

P2716

Moderate

Pressure Control Solenoid "D" Electrical

What Does P2716 Mean?

The transmission control module has detected an electrical fault in pressure control solenoid D circuit. This indicates a problem with the solenoid's electrical connection, wiring, or internal solenoid failure preventing proper operation.

Common Causes

35%

Failed pressure control solenoid D with internal short or open circuit

Pressure Control Solenoid D

30%

Damaged or corroded wiring harness or connector to solenoid D

Transmission Wiring Harness
Solenoid Connector

20%

Low or contaminated transmission fluid causing solenoid malfunction

Transmission Fluid
Transmission Filter

10%

Failed transmission control module (TCM/PCM)

Transmission Control Module

5%

Corroded or loose ground connection in transmission circuit

Ground Wire
Ground Terminal

Diagnostic Steps

1

Step 1: Inspect transmission fluid level and condition; check for burnt smell or metal particles

2

Step 2: Visually inspect solenoid D connector and wiring for damage, corrosion, or loose connections

3

Step 3: Measure resistance of pressure control solenoid D (typically 3-15 ohms) and compare to specifications

4

Step 4: Check voltage supply to solenoid D with key on, engine running (should be battery voltage)

5

Step 5: Monitor solenoid command signals with scan tool during operation to verify TCM output

Estimated Repair Cost

$200 - $800

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P2716 mean?

The transmission control module has detected an electrical fault in pressure control solenoid D circuit. This indicates a problem with the solenoid's electrical connection, wiring, or internal solenoid failure preventing proper operation.

What causes P2716?

The most common cause of P2716 (Pressure Control Solenoid "D" Electrical) is: Failed pressure control solenoid D with internal short or open circuit

How much does it cost to fix P2716?

Typical repair costs for P2716 range from $200 to $800, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P2716?

May cause harsh shifting, transmission slipping, or limp mode activation. Vehicle is generally drivable but transmission damage may occur if driven extensively.

How do I diagnose P2716?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P2716 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Automatic Transmission

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.