OBDHut

OBDHut

P267C

Moderate

B Rocker Arm Actuator Position Sensor Circuit Low Bank 2

What Does P267C Mean?

The rocker arm actuator position sensor circuit on Bank 2 is reading abnormally low voltage, below the expected minimum threshold. This electrical fault prevents accurate monitoring of variable valve timing operation.

Common Causes

40%

Short to ground in sensor wiring harness

Wiring Harness
Sensor Wire

35%

Failed rocker arm actuator position sensor (internal short)

Rocker Arm Position Sensor

15%

Damaged or corroded sensor connector causing ground fault

Connector
Connector Pins

7%

Water intrusion or oil contamination in connector

Connector Seal
Connector

3%

PCM internal fault or poor ground connection

PCM
Ground Strap

Diagnostic Steps

1

Step 1: Inspect sensor connector for corrosion, oil contamination, or damaged pins; clean and repair as needed

2

Step 2: Disconnect sensor and measure voltage at harness connector with key on, engine off (should read reference voltage 5V)

3

Step 3: Test sensor resistance with sensor disconnected; compare to manufacturer specifications

4

Step 4: Perform continuity test from sensor connector to ground to check for short circuit in wiring

5

Step 5: If wiring and sensor test good, verify PCM ground circuits and consider PCM fault

Estimated Repair Cost

$150 - $800

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P267C mean?

The rocker arm actuator position sensor circuit on Bank 2 is reading abnormally low voltage, below the expected minimum threshold. This electrical fault prevents accurate monitoring of variable valve timing operation.

What causes P267C?

The most common cause of P267C (B Rocker Arm Actuator Position Sensor Circuit Low Bank 2) is: Short to ground in sensor wiring harness

How much does it cost to fix P267C?

Typical repair costs for P267C range from $150 to $800, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P267C?

Safe to drive for short distances but may experience reduced performance and fuel economy. Prolonged operation could damage catalytic converter.

How do I diagnose P267C?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P267C to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Variable Valve Timing System

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.