OBDHut

OBDHut

P267B

Professional

B Rocker Arm Actuator Position Sensor Circuit Range/Performance Bank 2

What Does P267B Mean?

The rocker arm actuator position sensor on Bank 2 (side opposite cylinder #1) is reporting values outside expected parameters during variable valve timing operation. This indicates the PCM is receiving sensor data that doesn't correlate with commanded actuator position.

Common Causes

35%

Faulty rocker arm actuator position sensor

Rocker Arm Position Sensor
VVT Position Sensor

30%

Mechanical wear or failure of the rocker arm actuator mechanism

Rocker Arm Actuator
VVT Actuator Assembly
Actuator Pin

20%

Low engine oil level or incorrect oil viscosity affecting actuator operation

Engine Oil
Oil Filter

10%

Wiring harness damage or connector corrosion at sensor

Wiring Harness
Connector

5%

PCM software issue or calibration error

PCM

Diagnostic Steps

1

Step 1: Check engine oil level and condition; verify proper viscosity specification for VVT operation

2

Step 2: Inspect wiring harness and connector at Bank 2 rocker arm actuator position sensor for damage or corrosion

3

Step 3: Monitor sensor live data during engine operation to observe actual vs commanded position values

4

Step 4: Remove valve cover and inspect rocker arm actuator for mechanical binding, wear, or oil passage blockage

5

Step 5: Test sensor resistance and voltage output according to manufacturer specifications; replace if out of range

Estimated Repair Cost

$250 - $1,200

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P267B mean?

The rocker arm actuator position sensor on Bank 2 (side opposite cylinder #1) is reporting values outside expected parameters during variable valve timing operation. This indicates the PCM is receiving sensor data that doesn't correlate with commanded actuator position.

What causes P267B?

The most common cause of P267B (B Rocker Arm Actuator Position Sensor Circuit Range/Performance Bank 2) is: Faulty rocker arm actuator position sensor

How much does it cost to fix P267B?

Typical repair costs for P267B range from $250 to $1,200, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P267B?

Vehicle is generally safe to drive but may experience reduced power, poor fuel economy, and rough idle. Extended operation may cause catalytic converter damage due to improper combustion.

How do I diagnose P267B?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P267B to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Variable Valve Timing System

Difficulty

Professional

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.