OBDHut

OBDHut

P2655

Moderate

A Rocker Arm Actuator Control Circuit/Open Bank 2

What Does P2655 Mean?

The ECM has detected an open circuit or electrical fault in the control circuit for the 'A' rocker arm actuator on Bank 2. This prevents proper control of the variable valve timing/lift system on the second cylinder bank.

Common Causes

35%

Broken or open wire in actuator control circuit

Engine wiring harness

30%

Failed rocker arm actuator solenoid with open coil

Rocker arm actuator solenoid

25%

Disconnected or severely corroded electrical connector

Wiring connector
Connector terminals

10%

ECM internal driver circuit failure for Bank 2 actuator

Engine Control Module

Diagnostic Steps

1

Step 1: Locate and inspect Bank 2 'A' rocker arm actuator connector for damage, corrosion, or disconnection

2

Step 2: Measure resistance of actuator solenoid coil (should be 6-12 ohms typically); infinite resistance confirms open circuit

3

Step 3: Check for power supply voltage at actuator connector with key on (should have battery voltage on supply wire)

4

Step 4: Test continuity of control circuit wiring from actuator connector back to ECM

5

Step 5: If wiring and actuator test normal, perform ECM driver circuit test or consider ECM replacement

Estimated Repair Cost

$200 - $850

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P2655 mean?

The ECM has detected an open circuit or electrical fault in the control circuit for the 'A' rocker arm actuator on Bank 2. This prevents proper control of the variable valve timing/lift system on the second cylinder bank.

What causes P2655?

The most common cause of P2655 (A Rocker Arm Actuator Control Circuit/Open Bank 2) is: Broken or open wire in actuator control circuit

How much does it cost to fix P2655?

Typical repair costs for P2655 range from $200 to $850, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P2655?

Vehicle remains safe to drive but Bank 2 will operate with fixed valve timing. Expect rough idle, reduced power, and decreased fuel efficiency until repaired.

How do I diagnose P2655?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P2655 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Variable Valve Timing/Lift System

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.