OBDHut

OBDHut

P2659

Moderate

A Rocker Arm Actuator Control Circuit High Bank 2

What Does P2659 Mean?

The PCM has detected an abnormally high voltage in the control circuit for the Bank 2 rocker arm actuator. This suggests a short to power, open circuit, or resistance issue preventing proper actuator control.

Common Causes

35%

Shorted to voltage wiring or pinched harness contacting power source

Wiring Harness

25%

Open circuit in actuator solenoid or control circuit

Rocker Arm Actuator Solenoid
Wiring Harness

20%

Damaged or corroded connector with high resistance or open

Connector
Connector Terminals

15%

Failed rocker arm actuator with open internal coil

Rocker Arm Actuator Solenoid

5%

PCM driver circuit failure or internal fault

PCM

Diagnostic Steps

1

Step 1: Disconnect actuator and measure voltage at harness connector; should show 0V with key on, engine off

2

Step 2: Check for short to voltage by measuring voltage on control wire with actuator disconnected and PCM connected

3

Step 3: Test actuator solenoid resistance; infinite resistance indicates open coil

4

Step 4: Inspect connector terminals for corrosion, bent pins, or pushed-back terminals

5

Step 5: Check wiring harness routing for contact with hot components or voltage sources

Estimated Repair Cost

$150 - $750

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P2659 mean?

The PCM has detected an abnormally high voltage in the control circuit for the Bank 2 rocker arm actuator. This suggests a short to power, open circuit, or resistance issue preventing proper actuator control.

What causes P2659?

The most common cause of P2659 (A Rocker Arm Actuator Control Circuit High Bank 2) is: Shorted to voltage wiring or pinched harness contacting power source

How much does it cost to fix P2659?

Typical repair costs for P2659 range from $150 to $750, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P2659?

Safe to drive with reduced performance and fuel economy. No immediate safety concerns but should be repaired to restore proper engine operation.

How do I diagnose P2659?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P2659 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Variable Valve Timing/Cylinder Deactivation System

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.