OBDHut

OBDHut

P2168

Moderate

Throttle/Pedal Position Sensor "F" Maximum Stop Performance

What Does P2168 Mean?

The PCM has detected that throttle/pedal position sensor 'F' is not reaching its expected maximum voltage or position during operation. This is a redundant sensor circuit fault affecting electronic throttle control correlation.

Common Causes

45%

Faulty accelerator pedal position sensor (APP sensor F circuit failure)

Accelerator Pedal Position Sensor
APP Sensor Assembly

30%

Wiring harness damage, corrosion, or connector issues in APP sensor F circuit

Wiring Harness
Electrical Connectors
Connector Pins

15%

PCM internal fault or software calibration issue

Powertrain Control Module

10%

Mechanical restriction in accelerator pedal travel or damaged pedal assembly

Accelerator Pedal Assembly
Pedal Mechanism

Diagnostic Steps

1

Step 1: Monitor live data for APP sensor F voltage throughout full pedal travel range and compare to sensor E

2

Step 2: Physically inspect accelerator pedal for binding, obstruction, or restricted travel to maximum position

3

Step 3: Inspect APP sensor F wiring harness and connectors for damage, corrosion, or loose connections

4

Step 4: Test APP sensor F voltage supply (5V reference) and ground circuits with multimeter

5

Step 5: Perform throttle/pedal position relearn procedure, replace APP sensor assembly if readings are out of specification

Estimated Repair Cost

$150 - $600

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P2168 mean?

The PCM has detected that throttle/pedal position sensor 'F' is not reaching its expected maximum voltage or position during operation. This is a redundant sensor circuit fault affecting electronic throttle control correlation.

What causes P2168?

The most common cause of P2168 (Throttle/Pedal Position Sensor "F" Maximum Stop Performance) is: Faulty accelerator pedal position sensor (APP sensor F circuit failure)

How much does it cost to fix P2168?

Typical repair costs for P2168 range from $150 to $600, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P2168?

May cause reduced engine power mode, limiting acceleration capability. Vehicle may experience hesitation or limited throttle response affecting safe operation in traffic.

How do I diagnose P2168?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P2168 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Electronic Throttle Control System

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.