OBDHut

OBDHut

C1906

Moderate

Ride Control LR Shock Actuator Circuit Open

What Does C1906 Mean?

The ride control module has detected an open circuit in the left rear shock actuator control circuit. A break in wiring or connector prevents the module from energizing the LR damper solenoid, locking the shock in its default damping state.

Common Causes

35%

Severed wire in the LR shock actuator harness from road debris or fatigue at suspension flex points

LR Shock Actuator Harness
Harness Conduit

30%

Disconnected or loose terminal at the actuator or module connector from vibration

Actuator Connector
Terminal Pins
Lock Tab

25%

Internal open solenoid coil in the LR shock actuator

LR Shock Actuator Solenoid

10%

Corroded terminal contacts at connection points

Connector Terminals
Weather Seals

Diagnostic Steps

1

Step 1: Verify the LR shock actuator connector is seated and locked. Check for physical disconnection.

2

Step 2: Measure actuator solenoid resistance. An OL reading confirms internal failure.

3

Step 3: Test continuity on each wire from actuator connector to module connector.

4

Step 4: Inspect harness at high-stress areas: near the shock tower, along suspension arms, and at body pass-throughs.

5

Step 5: Repair with weatherproof connections and proper harness routing to prevent repeat failure.

Estimated Repair Cost

$150 - $850

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does C1906 mean?

The ride control module has detected an open circuit in the left rear shock actuator control circuit. A break in wiring or connector prevents the module from energizing the LR damper solenoid, locking the shock in its default damping state.

What causes C1906?

The most common cause of C1906 (Ride Control LR Shock Actuator Circuit Open) is: Severed wire in the LR shock actuator harness from road debris or fatigue at suspension flex points

How much does it cost to fix C1906?

Typical repair costs for C1906 range from $150 to $850, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with C1906?

The LR shock operates in a fixed damping mode, causing uneven ride control at the rear. Handling may be slightly unpredictable, particularly on rough road surfaces.

How do I diagnose C1906?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to C1906 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Chassis

System

Electronic Ride Control / Adaptive Suspension

Difficulty

Moderate

Type

Manufacturer

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.