OBDHut

OBDHut

U2016

Professional

Signal Link Short to Ground (Non SCP) / From NGV Module

What Does U2016 Mean?

A communication signal wire is shorted to ground, pulling down the network voltage and preventing proper communication. This specifically may involve the NGV (Natural Gas Vehicle) module circuit in applicable vehicles.

Common Causes

45%

Damaged wire insulation causing short to chassis ground or metal component

CAN Bus Wiring
Wiring Harness
Wire Insulation

25%

Connector terminal corrosion causing internal short to ground within connector housing

Module Connector
Harness Connector
Connector Terminals

20%

Failed module with internal short circuit pulling bus line to ground

NGV Module
Control Module
Any Connected Module

10%

Water intrusion in connector or module causing short circuit path

Sealed Connector
Module Housing
Connector Seal

Diagnostic Steps

1

Step 1: Measure resistance from CAN High and CAN Low to ground separately (should be 60 ohms each, not near 0 ohms)

2

Step 2: Disconnect modules one at a time to isolate which module or circuit segment contains the short

3

Step 3: Inspect wiring harness routing for areas where wires contact sharp edges, hot components, or moving parts

4

Step 4: Check for damaged wire insulation, particularly at harness entry/exit points through firewalls or body openings

5

Step 5: If NGV module is present, inspect that module and its connections first as code description suggests involvement

Estimated Repair Cost

$200 - $1,200

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does U2016 mean?

A communication signal wire is shorted to ground, pulling down the network voltage and preventing proper communication. This specifically may involve the NGV (Natural Gas Vehicle) module circuit in applicable vehicles.

What causes U2016?

The most common cause of U2016 (Signal Link Short to Ground (Non SCP) / From NGV Module) is: Damaged wire insulation causing short to chassis ground or metal component

How much does it cost to fix U2016?

Typical repair costs for U2016 range from $200 to $1,200, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with U2016?

Communication failure can affect safety systems including ABS, airbags, and engine control. Vehicle may enter reduced power mode. Professional diagnosis recommended.

How do I diagnose U2016?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to U2016 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Network

System

Communication Network

Difficulty

Professional

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.