OBDHut

OBDHut

U1017

Professional

SCP (J1850) Invalid or Missing Data for Primary Id

What Does U1017 Mean?

This code represents another missing module ID on the SCP network. The pattern of U1013-U1017 being present together strongly suggests a systemic network bus failure rather than multiple simultaneous module failures.

Common Causes

40%

Complete SCP bus circuit failure due to wire damage or connector failure

SCP bus wiring
Network connectors
Main harness

25%

Failed four-wheel drive module or transfer case control module

4WD module
Transfer case module
Module connectors

18%

Multiple modules unpowered due to main power distribution failure

Power distribution box
Main fuses
Power supply circuits

12%

Ground distribution failure affecting multiple module ground circuits

Ground distribution point
Ground straps
Chassis grounds

5%

Lightning strike or electrical surge damage to multiple modules

Multiple control modules
SCP interface circuits

Diagnostic Steps

1

Step 1: Check all main power distribution fuses and relays that supply control modules

2

Step 2: Verify main ground connections are clean, tight, and have less than 0.1 ohm resistance

3

Step 3: Test SCP bus continuity from each module location to verify bus integrity throughout vehicle

4

Step 4: Use scan tool network test function to monitor real-time module communication status

5

Step 5: If bus is physically intact, consider central gateway or hub module failure disabling network

Estimated Repair Cost

$200 - $1,600

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does U1017 mean?

This code represents another missing module ID on the SCP network. The pattern of U1013-U1017 being present together strongly suggests a systemic network bus failure rather than multiple simultaneous module failures.

What causes U1017?

The most common cause of U1017 (SCP (J1850) Invalid or Missing Data for Primary Id) is: Complete SCP bus circuit failure due to wire damage or connector failure

How much does it cost to fix U1017?

Typical repair costs for U1017 range from $200 to $1,600, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with U1017?

Multiple vehicle systems may be non-functional creating unpredictable vehicle behavior. Traction control, ABS, stability control, and other safety systems may not operate.

How do I diagnose U1017?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to U1017 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Network

System

Network Communication

Difficulty

Professional

Type

Manufacturer

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.