What Does U059D Mean?
The vehicle network is receiving invalid or corrupted data from drive motor control module D. This indicates a four-motor vehicle configuration or a dual-motor system with redundant designations.
Safety Warning
Can result in loss of one motor's propulsion capability, causing severe handling imbalance, reduced acceleration, or complete loss of vehicle mobility. May create dangerous driving conditions if power loss occurs during operation.
Common Causes
40%
Failed drive motor control module D with internal electronic component failure or data corruption
25%
Corroded connectors or damaged wiring harness between motor controller D and communication network
20%
Defective motor position sensor or encoder on drive motor D sending erratic signals
10%
Firmware corruption or software incompatibility in drive motor control module D
5%
Power supply issues or ground fault affecting controller D operation
Diagnostic Steps
1
Step 1: Access live data stream from drive motor controller D to identify which data parameters are reading as invalid or out of specification
2
Step 2: Perform visual inspection of motor controller D and associated high-voltage connections for signs of thermal damage, arcing, or corrosion
3
Step 3: Test motor position sensor signals using oscilloscope to verify proper signal amplitude, frequency, and phase relationship
4
Step 4: Measure supply voltage and ground resistance at drive motor controller D; verify proper CAN bus termination and signal levels
5
Step 5: Check for technical service bulletins and available software updates; replace drive motor control module D if diagnostics indicate internal failure
Estimated Repair Cost
$800 - $4,500
Parts + labor, varies by vehicle and location
The vehicle network is receiving invalid or corrupted data from drive motor control module D. This indicates a four-motor vehicle configuration or a dual-motor system with redundant designations.
The most common cause of U059D (Invalid Data Received From Drive Motor Control Module "D") is: Failed drive motor control module D with internal electronic component failure or data corruption
Typical repair costs for U059D range from $800 to $4,500, depending on the vehicle, location, and whether you do it yourself or go to a shop.
Can result in loss of one motor's propulsion capability, causing severe handling imbalance, reduced acceleration, or complete loss of vehicle mobility. May create dangerous driving conditions if power loss occurs during operation.
Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to U059D to identify the root cause.
OBDHut Mobile App
Scan codes directly from your car with the OBDHut app.
Coming Soon
Quick Info
Category
Network
System
Hybrid/Electric Powertrain
Difficulty
Type
Generic (SAE)
Recommended Tools
OBD2 Scanner
A quality scan tool helps you read codes, view live data, and clear faults.
