What Does U0562 Mean?
The control module receiving data from Seat Control Switch Module B is detecting corrupted or implausible information on the vehicle network. This indicates a communication fault between the seat control module and other vehicle systems.
Common Causes
35%
Faulty seat control switch module B with internal component failure
30%
Damaged or corroded wiring harness between seat module and network bus
20%
Poor ground connection at seat control module
10%
Software corruption or calibration issue in seat control module
5%
Network interference from aftermarket accessories or faulty module on same bus
Diagnostic Steps
1
Step 1: Monitor live data from Seat Control Module B and verify if data packets are present but corrupted or completely absent
2
Step 2: Inspect all connectors at seat control module B for corrosion, bent pins, or moisture intrusion
3
Step 3: Check power and ground circuits to seat control module B with multimeter; verify 12V supply and less than 0.5 ohm ground resistance
4
Step 4: Use bidirectional controls to command seat functions and verify module responds appropriately
5
Step 5: If module responds but code persists, check CAN bus signal quality with oscilloscope looking for proper voltage levels (2.5V nominal, switching between 2.0-3.5V)
Estimated Repair Cost
$150 - $800
Parts + labor, varies by vehicle and location
The control module receiving data from Seat Control Switch Module B is detecting corrupted or implausible information on the vehicle network. This indicates a communication fault between the seat control module and other vehicle systems.
The most common cause of U0562 (Invalid Data Received From Seat Control Switch Module "B") is: Faulty seat control switch module B with internal component failure
Typical repair costs for U0562 range from $150 to $800, depending on the vehicle, location, and whether you do it yourself or go to a shop.
No direct safety impact; seat adjustment functions may be inoperative or erratic. Vehicle is safe to drive but comfort features may be compromised.
Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to U0562 to identify the root cause.
OBDHut Mobile App
Scan codes directly from your car with the OBDHut app.
Coming Soon
Quick Info
Category
Network
System
Body Control / Comfort Systems
Difficulty
Type
Generic (SAE)
Recommended Tools
OBD2 Scanner
A quality scan tool helps you read codes, view live data, and clear faults.
