What Does U0458 Mean?
The control module is receiving corrupted or implausible data from Information Center B. This indicates a communication problem between modules on the vehicle network, preventing proper information display and system coordination.
Common Causes
35%
Faulty or corroded wiring harness connections between Information Center B and other modules
30%
Defective Information Center B module with internal software or hardware failure
20%
CAN bus network issues including termination resistor failures or short circuits
10%
Low battery voltage or poor ground connection affecting module operation
5%
Software calibration mismatch or corrupted module programming
Diagnostic Steps
1
Step 1: Use scan tool to monitor live data from Information Center B and verify what invalid parameters are being transmitted
2
Step 2: Inspect all connectors and wiring to Information Center B for corrosion, damage, or loose connections
3
Step 3: Check battery voltage and all ground connections to ensure proper voltage supply (11.5V minimum with key on)
4
Step 4: Perform CAN bus integrity test measuring resistance between CAN High and CAN Low (should be 60 ohms with key off)
5
Step 5: If wiring and power are good, attempt module reprogramming/software update; replace Information Center B if fault persists
Estimated Repair Cost
$100 - $800
Parts + labor, varies by vehicle and location
The control module is receiving corrupted or implausible data from Information Center B. This indicates a communication problem between modules on the vehicle network, preventing proper information display and system coordination.
The most common cause of U0458 (Invalid Data Received From Information Center "B") is: Faulty or corroded wiring harness connections between Information Center B and other modules
Typical repair costs for U0458 range from $100 to $800, depending on the vehicle, location, and whether you do it yourself or go to a shop.
Does not directly affect vehicle safety or drivability. May prevent proper display of important vehicle information to the driver.
Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to U0458 to identify the root cause.
OBDHut Mobile App
Scan codes directly from your car with the OBDHut app.
Coming Soon
Quick Info
Category
Network
System
Body Control and Information Display
Difficulty
Type
Generic (SAE)
Recommended Tools
OBD2 Scanner
A quality scan tool helps you read codes, view live data, and clear faults.
