OBDHut

OBDHut

U0435

Critical
Professional

Invalid Data Received From Power Steering Control Module Rear

What Does U0435 Mean?

The receiving control module has detected invalid data from the rear power steering control module. This affects vehicles with rear-wheel steering or four-wheel steering systems where the rear axle steering angle is electronically controlled.

Safety Warning

Rear steering functionality will be disabled, affecting vehicle maneuverability at low speeds and stability at high speeds. Vehicle handling will differ significantly from normal operation.

Common Causes

30%

Rear power steering control module internal failure or software error

Rear Steering Control Module
Rear Power Steering ECU

25%

Faulty rear steering angle sensor or position sensor providing incorrect feedback

Rear Steering Angle Sensor
Rear Wheel Position Sensor

20%

CAN bus communication fault or damaged wiring to rear steering module

CAN Bus Wiring
Module Connector
Rear Harness

15%

Mechanical binding or failure in rear steering actuator affecting sensor readings

Rear Steering Actuator
Rear Steering Rack
Steering Motor

10%

Power supply issues or poor ground connection at rear steering module

Power Supply Circuit
Ground Connections
Module Fuse

Diagnostic Steps

1

Step 1: Check for additional DTCs in rear steering module and related systems; verify rear steering system power and ground circuits are within specifications

2

Step 2: Inspect rear steering module connector and wiring harness for damage, corrosion, or loose connections

3

Step 3: Monitor live data from rear steering angle sensor while manually moving rear wheels (if possible with engine off); verify smooth, proportional readings

4

Step 4: Check CAN bus communication between rear steering module and main control modules; verify network integrity

5

Step 5: Perform rear steering system initialization/calibration procedure per manufacturer specifications; if fault persists, test rear steering actuator operation and replace faulty components

Estimated Repair Cost

$400 - $2,500

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does U0435 mean?

The receiving control module has detected invalid data from the rear power steering control module. This affects vehicles with rear-wheel steering or four-wheel steering systems where the rear axle steering angle is electronically controlled.

What causes U0435?

The most common cause of U0435 (Invalid Data Received From Power Steering Control Module Rear) is: Rear power steering control module internal failure or software error

How much does it cost to fix U0435?

Typical repair costs for U0435 range from $400 to $2,500, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with U0435?

Rear steering functionality will be disabled, affecting vehicle maneuverability at low speeds and stability at high speeds. Vehicle handling will differ significantly from normal operation.

How do I diagnose U0435?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to U0435 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Network

System

Four-Wheel Steering / Rear Steering

Difficulty

Professional

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.