What Does U0430 Mean?
The control module is receiving corrupted or invalid data from the tire pressure monitoring system (TPMS) module via the vehicle network. This prevents proper tire pressure warnings and monitoring.
Common Causes
30%
Faulty TPMS control module or receiver
25%
Damaged wiring or connectors to TPMS module
20%
Failed or unprogrammed TPMS sensors causing module confusion
15%
Low voltage or poor ground at TPMS module
10%
CAN bus communication issue or module software corruption
Diagnostic Steps
1
Step 1: Verify all tire pressures are correct and check if TPMS warning light is illuminated
2
Step 2: Use TPMS tool to activate each sensor and verify proper signal reception by module
3
Step 3: Check battery voltage and inspect wiring/connectors to TPMS control module for damage
4
Step 4: Verify TPMS sensor IDs are properly programmed in the TPMS module memory
5
Step 5: Test TPMS module communication on CAN bus; reprogram or replace module if defective
Estimated Repair Cost
$100 - $600
Parts + labor, varies by vehicle and location
The control module is receiving corrupted or invalid data from the tire pressure monitoring system (TPMS) module via the vehicle network. This prevents proper tire pressure warnings and monitoring.
The most common cause of U0430 (Invalid Data Received From Tire Pressure Monitor Module) is: Faulty TPMS control module or receiver
Typical repair costs for U0430 range from $100 to $600, depending on the vehicle, location, and whether you do it yourself or go to a shop.
Driver will not receive warnings about low tire pressure, increasing risk of tire failure or poor handling. Regular manual tire pressure checks are essential.
Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to U0430 to identify the root cause.
OBDHut Mobile App
Scan codes directly from your car with the OBDHut app.
Coming Soon
Quick Info
Category
Network
System
Tire Pressure Monitoring System
Difficulty
Type
Generic (SAE)
Recommended Tools
OBD2 Scanner
A quality scan tool helps you read codes, view live data, and clear faults.
