OBDHut

OBDHut

U029C

Critical
Professional

Lost Communication With Drive Motor Control Module "D"

What Does U029C Mean?

Communication has been lost with Drive Motor Control Module D on the vehicle's network bus. This affects vehicles with multiple motor control units, preventing proper coordination of drive motor operation.

Safety Warning

Vehicle propulsion may be severely limited or disabled. Unexpected loss of drive power creates significant safety hazard.

Common Causes

35%

Drive Motor Control Module D failure or internal malfunction

Drive Motor Control Module D
Power Supply Circuit

30%

Wiring harness damage or connector corrosion to Module D

Wiring Harness
Connector Pins
Seals

20%

CAN network fault on Module D circuit segment

CAN Bus Wiring
Termination Resistor

10%

Module D software issue or programming incomplete

Drive Motor Control Module D

5%

Poor ground connection at Module D mounting location

Ground Wire
Mounting Bolt

Diagnostic Steps

1

Step 1: Check power supply voltage and ground integrity at Drive Motor Control Module D connector

2

Step 2: Thoroughly inspect Module D wiring harness and connectors for physical damage or water intrusion

3

Step 3: Measure CAN High and CAN Low voltage at Module D (should read approximately 2.5V each)

4

Step 4: Compare communication status of all motor control modules to isolate if issue is Module D specific

5

Step 5: Attempt module reflash/reprogramming before replacement; swap module if programming fails

Estimated Repair Cost

$300 - $2,500

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does U029C mean?

Communication has been lost with Drive Motor Control Module D on the vehicle's network bus. This affects vehicles with multiple motor control units, preventing proper coordination of drive motor operation.

What causes U029C?

The most common cause of U029C (Lost Communication With Drive Motor Control Module "D") is: Drive Motor Control Module D failure or internal malfunction

How much does it cost to fix U029C?

Typical repair costs for U029C range from $300 to $2,500, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with U029C?

Vehicle propulsion may be severely limited or disabled. Unexpected loss of drive power creates significant safety hazard.

How do I diagnose U029C?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to U029C to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Network

System

Hybrid/Electric Powertrain

Difficulty

Professional

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.