OBDHut

OBDHut

U025A

Professional

Lost Communication With Special Purpose Vehicle Control Module "B"

What Does U025A Mean?

The control module has lost communication with special purpose vehicle control module B. This is a secondary specialized module for application-specific equipment on commercial, emergency, or utility vehicles.

Common Causes

35%

Special purpose control module B internal failure

Special Purpose Module B
Auxiliary Control Module

25%

Wiring harness damage or connector issues to module B

Wiring Harness
Module Connector
Cable Assembly

25%

Power or ground circuit fault to special module B

Fuse
Relay
Power Supply
Ground Wire

10%

CAN bus communication circuit fault or network issue

CAN Bus Wiring
Network Junction
Terminators

5%

Module not properly programmed or configured

Module Configuration

Diagnostic Steps

1

Step 1: Determine the identity and location of special purpose module B from service documentation for your specific vehicle

2

Step 2: Verify power and ground circuits at module B connector using multimeter with key on

3

Step 3: Inspect wiring harness routing and connectors, especially if equipment is exposed to weather or vibration

4

Step 4: Check CAN bus communication signals at the module (both lines should be approximately 2.5V)

5

Step 5: Verify module configuration matches vehicle setup, attempt reprogramming or replace module if circuits are intact

Estimated Repair Cost

$250 - $2,000

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does U025A mean?

The control module has lost communication with special purpose vehicle control module B. This is a secondary specialized module for application-specific equipment on commercial, emergency, or utility vehicles.

What causes U025A?

The most common cause of U025A (Lost Communication With Special Purpose Vehicle Control Module "B") is: Special purpose control module B internal failure

How much does it cost to fix U025A?

Typical repair costs for U025A range from $250 to $2,000, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with U025A?

Safety implications vary based on specific equipment controlled. Loss of communication with specialized safety or emergency equipment may render the vehicle non-compliant for its intended special purpose operation.

How do I diagnose U025A?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to U025A to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Network

System

Specialized Equipment/Communication Network

Difficulty

Professional

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.