What Does U0258 Mean?
Communication with the radio transceiver module has been lost on the vehicle network. The radio/audio module is not responding to network requests from other control modules.
Common Causes
35%
Radio/audio module internal failure or malfunction
30%
Blown fuse or power supply issue to radio module
20%
Damaged wiring or loose connector at radio module
10%
CAN bus communication circuit fault at radio
5%
Recent radio replacement or module programming issue
Diagnostic Steps
1
Step 1: Check all fuses related to the radio and infotainment system
2
Step 2: Verify the radio module has proper power and ground using a multimeter at the back of the radio
3
Step 3: Remove radio and inspect rear connector for bent pins, corrosion, or loose fit
4
Step 4: Check CAN bus signal voltages at radio connector (both lines should read approximately 2.5V)
5
Step 5: If all circuits are good, test radio functionality or attempt reprogramming before replacement
Estimated Repair Cost
$100 - $800
Parts + labor, varies by vehicle and location
Communication with the radio transceiver module has been lost on the vehicle network. The radio/audio module is not responding to network requests from other control modules.
The most common cause of U0258 (Lost Communication With Radio Transceiver) is: Radio/audio module internal failure or malfunction
Typical repair costs for U0258 range from $100 to $800, depending on the vehicle, location, and whether you do it yourself or go to a shop.
Safe to drive. Loss of radio function does not affect vehicle safety systems, though driver may be distracted attempting to use non-functional audio controls.
Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to U0258 to identify the root cause.
OBDHut Mobile App
Scan codes directly from your car with the OBDHut app.
Coming Soon
Quick Info
Category
Network
System
Infotainment/Communication Network
Difficulty
Type
Generic (SAE)
Recommended Tools
OBD2 Scanner
A quality scan tool helps you read codes, view live data, and clear faults.
