OBDHut

OBDHut

U0224

Moderate

Lost Communication With "Door Window Motor C"

What Does U0224 Mean?

Network communication has been lost between the body control module and door window motor C. This communication failure prevents normal window operation and status feedback from this motor module.

Common Causes

35%

Wire damage in door jamb from door flexing and movement

Door Jamb Harness
Wiring Boot
Flex Cables

25%

Failed window motor C control module electronics

Window Motor Module C
Motor Control Board

20%

Corroded or disconnected connector at motor module

Window Motor Connector
Module Connector

15%

Power supply or ground circuit open or high resistance

Power Feed
Ground Circuit
Fuse

5%

CAN bus wiring fault or network disruption

CAN Communication Wires
Network Bus

Diagnostic Steps

1

Step 1: Perform visual inspection of door jamb wiring for breaks, abrasion, or damage from door operation

2

Step 2: Check window motor C module connector for proper seating, corrosion, water damage, and terminal integrity

3

Step 3: Use scan tool to attempt communication with window motor C module and check module identification

4

Step 4: Test electrical circuits at motor module: verify battery voltage on power pin and less than 0.2 ohms resistance to ground

5

Step 5: Check CAN bus communication signals with voltmeter or scope; CAN High should be approximately 2.5-3.5V, CAN Low 1.5-2.5V

Estimated Repair Cost

$200 - $700

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does U0224 mean?

Network communication has been lost between the body control module and door window motor C. This communication failure prevents normal window operation and status feedback from this motor module.

What causes U0224?

The most common cause of U0224 (Lost Communication With "Door Window Motor C") is: Wire damage in door jamb from door flexing and movement

How much does it cost to fix U0224?

Typical repair costs for U0224 range from $200 to $700, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with U0224?

Vehicle remains safe to operate. Loss of window function may present security or weather sealing concerns if window cannot be raised.

How do I diagnose U0224?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to U0224 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Network

System

Body Control Network / Power Window System

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.