OBDHut

OBDHut

U0208

Moderate

Lost Communication With "Seat Control Module A"

What Does U0208 Mean?

The vehicle's network has lost communication with Seat Control Module A, typically the driver's seat module. This prevents the central control modules from communicating with the seat's electronic functions.

Common Causes

35%

Failed seat control module A with internal circuit board failure

Seat Control Module A
Driver Seat Module

30%

Damaged wiring harness under seat due to seat track movement or pinching

Seat Wiring Harness
Electrical Connectors
Wiring Loom

20%

Corroded or loose connector at seat control module

Electrical Connectors
Connector Terminals

10%

Blown fuse or loss of power/ground to seat control module

Fuse
Power Wire
Ground Connection

5%

CAN bus network fault affecting seat module communication

CAN Bus Wiring
Network Termination

Diagnostic Steps

1

Step 1: Locate seat control module A (usually under driver's seat, secured to seat frame or floor)

2

Step 2: Inspect wiring harness under seat for damage from seat movement, check for pinched or chafed wires

3

Step 3: Verify power and ground at the seat control module connector with ignition on

4

Step 4: Check connector terminals for corrosion, moisture, or pushed-back pins causing poor contact

5

Step 5: Test CAN communication lines and replace seat control module if all wiring and power circuits are good

Estimated Repair Cost

$150 - $900

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does U0208 mean?

The vehicle's network has lost communication with Seat Control Module A, typically the driver's seat module. This prevents the central control modules from communicating with the seat's electronic functions.

What causes U0208?

The most common cause of U0208 (Lost Communication With "Seat Control Module A") is: Failed seat control module A with internal circuit board failure

How much does it cost to fix U0208?

Typical repair costs for U0208 range from $150 to $900, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with U0208?

Not a direct safety concern, but power seat adjustment, memory functions, and seat heating/cooling may be inoperable. Ensure driver can achieve proper seating position using manual adjustments if available.

How do I diagnose U0208?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to U0208 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Network

System

Body Control/Seat Control

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.