OBDHut

OBDHut

U0114

Professional

Lost Communication With Four-Wheel Drive Clutch Control Module

What Does U0114 Mean?

The vehicle's control modules cannot communicate with the Four-Wheel Drive Clutch Control Module over the network. This affects the operation and engagement of the electronically controlled four-wheel drive system.

Common Causes

35%

Damaged wiring harness or corroded connectors to 4WD module

4WD Module Wiring
Connectors
Wire Harness

30%

Failed Four-Wheel Drive Clutch Control Module

4WD Clutch Control Module

20%

CAN bus circuit open or short condition

CAN Bus Wiring
Network Circuit

10%

Power or ground circuit failure to 4WD module

Fuses
Relays
Ground Connections

5%

Module software corruption or version incompatibility

Module Software

Diagnostic Steps

1

Step 1: Verify fuse and relay operation for the 4WD clutch control module; check for proper voltage supply

2

Step 2: Inspect connectors at the 4WD module for corrosion, bent pins, or water damage

3

Step 3: Test communication with 4WD module using scan tool and verify module is powered and responding

4

Step 4: Check CAN bus continuity and resistance between 4WD module and other control modules

5

Step 5: If wiring and power are good, test 4WD module operation or replace if internal failure confirmed

Estimated Repair Cost

$200 - $1,400

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does U0114 mean?

The vehicle's control modules cannot communicate with the Four-Wheel Drive Clutch Control Module over the network. This affects the operation and engagement of the electronically controlled four-wheel drive system.

What causes U0114?

The most common cause of U0114 (Lost Communication With Four-Wheel Drive Clutch Control Module) is: Damaged wiring harness or corroded connectors to 4WD module

How much does it cost to fix U0114?

Typical repair costs for U0114 range from $200 to $1,400, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with U0114?

Four-wheel drive system will not engage or may stay engaged permanently. Vehicle can typically be driven in two-wheel drive mode, but off-road capability and adverse weather traction may be compromised.

How do I diagnose U0114?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to U0114 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Network

System

Four-Wheel Drive System

Difficulty

Professional

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.