OBDHut

OBDHut

U010E

Professional

Lost Communication With Reductant Control Module

What Does U010E Mean?

The PCM has lost communication with the diesel exhaust fluid (DEF) reductant control module that manages selective catalytic reduction (SCR) systems. This affects the emissions control system in diesel vehicles.

Common Causes

35%

Reductant control module internal circuit failure

Reductant Control Module
DEF Control Module

30%

Corroded or damaged wiring/connectors in DEF system circuit

Wiring Harness
Connectors
Pins

20%

CAN bus network communication fault

CAN Bus Wiring
Network Components

10%

DEF system freezing causing module power loss or damage

DEF Heater
Module Power Supply
Fuses

5%

PCM or module software incompatibility

Module Software
PCM Firmware

Diagnostic Steps

1

Step 1: Verify power and ground supply to reductant control module, check all fuses and relays

2

Step 2: Inspect DEF system wiring and connectors for corrosion from DEF leakage (highly corrosive)

3

Step 3: Check CAN bus communication signals at reductant module connector

4

Step 4: Verify DEF heater operation if cold weather related, ensure module isn't frozen

5

Step 5: Check for DEF contamination or crystallization affecting module operation

Estimated Repair Cost

$200 - $1,800

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does U010E mean?

The PCM has lost communication with the diesel exhaust fluid (DEF) reductant control module that manages selective catalytic reduction (SCR) systems. This affects the emissions control system in diesel vehicles.

What causes U010E?

The most common cause of U010E (Lost Communication With Reductant Control Module) is: Reductant control module internal circuit failure

How much does it cost to fix U010E?

Typical repair costs for U010E range from $200 to $1,800, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with U010E?

Vehicle may experience reduced power or speed limiting after extended operation. Some vehicles will not restart after shutdown if issue persists per EPA regulations.

How do I diagnose U010E?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to U010E to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Network

System

Diesel Emissions Control / Network Communication

Difficulty

Professional

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.