What Does U0010 Mean?
A fault has been detected on the medium-speed CAN bus network, which typically operates at 125-250 kbps and connects modules like HVAC, body control, and convenience features. Communication between modules on this network is compromised or absent.
Common Causes
30%
Faulty or unresponsive module on the medium-speed CAN network causing bus disruption
25%
Damaged medium-speed CAN bus wiring harness or open circuit in twisted pair
20%
Corroded or loose connector in medium-speed CAN network circuit
15%
Failed gateway module not properly routing messages between high-speed and medium-speed networks
10%
Missing or failed terminating resistor on medium-speed CAN bus
Diagnostic Steps
1
Step 1: Use advanced scan tool to monitor medium-speed CAN bus traffic and identify which modules are communicating and which are absent
2
Step 2: Measure voltage on medium-speed CAN High and CAN Low wires (should be approximately 2.5V with proper biasing, may vary by manufacturer)
3
Step 3: Check terminating resistance across CAN High and CAN Low at network endpoints (typically 120 ohms per resistor, 60 ohms total)
4
Step 4: Systematically disconnect modules on medium-speed network to identify if one faulty module is pulling down the entire bus
5
Step 5: Inspect wiring harness routing through doors, under seats, and in areas prone to flex damage or water intrusion
Estimated Repair Cost
$150 - $1,800
Parts + labor, varies by vehicle and location
A fault has been detected on the medium-speed CAN bus network, which typically operates at 125-250 kbps and connects modules like HVAC, body control, and convenience features. Communication between modules on this network is compromised or absent.
The most common cause of U0010 (Medium Speed CAN Communication Bus) is: Faulty or unresponsive module on the medium-speed CAN network causing bus disruption
Typical repair costs for U0010 range from $150 to $1,800, depending on the vehicle, location, and whether you do it yourself or go to a shop.
Loss of medium-speed CAN communication typically affects comfort and convenience features rather than critical safety systems. However, instrument cluster warnings and some driver information may be unavailable.
Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to U0010 to identify the root cause.
OBDHut Mobile App
Scan codes directly from your car with the OBDHut app.
Coming Soon
Quick Info
Category
Network
System
Network Communications
Difficulty
Type
Generic (SAE)
Recommended Tools
OBD2 Scanner
A quality scan tool helps you read codes, view live data, and clear faults.
