OBDHut

OBDHut

P3488

Moderate

Cylinder 11 Exhaust Valve Control Circuit High

What Does P3488 Mean?

The PCM detects abnormally high voltage in the cylinder 11 exhaust valve control circuit. This indicates an open in the ground circuit, short to voltage, or solenoid driver circuit malfunction.

Common Causes

35%

Open ground circuit from exhaust valve control solenoid to PCM or chassis

Ground Wire
Ground Connection

25%

Short to battery voltage in control circuit wiring

Wiring Harness
Wire Insulation

20%

Failed exhaust valve control solenoid with internal open creating high resistance

Exhaust Valve Control Solenoid

15%

Corroded ground terminal or poor ground connection at PCM or engine block

Ground Terminal
Ground Strap

5%

PCM driver circuit failure causing improper voltage regulation

Powertrain Control Module

Diagnostic Steps

1

Step 1: Check voltage at exhaust valve control solenoid connector with key on, engine off; should be 0V until commanded

2

Step 2: Verify ground circuit continuity from solenoid connector to PCM and to chassis ground

3

Step 3: Inspect all ground connections for corrosion, looseness, or damage; clean and tighten as needed

4

Step 4: Check for chafed wiring that may be contacting voltage sources during engine movement

5

Step 5: Monitor PCM command signal versus actual circuit voltage to identify driver circuit issues

Estimated Repair Cost

$100 - $850

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P3488 mean?

The PCM detects abnormally high voltage in the cylinder 11 exhaust valve control circuit. This indicates an open in the ground circuit, short to voltage, or solenoid driver circuit malfunction.

What causes P3488?

The most common cause of P3488 (Cylinder 11 Exhaust Valve Control Circuit High) is: Open ground circuit from exhaust valve control solenoid to PCM or chassis

How much does it cost to fix P3488?

Typical repair costs for P3488 range from $100 to $850, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P3488?

Safe to drive but repair soon to avoid performance loss and potential engine damage. High voltage conditions may damage PCM driver circuits if left unrepaired.

How do I diagnose P3488?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P3488 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Variable Valve Timing/Cylinder Deactivation System

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.