OBDHut

OBDHut

P2816

Moderate

Pressure Control Solenoid "H"

What Does P2816 Mean?

The TCM has detected a general fault with pressure control solenoid 'H'. This is a broader code indicating electrical or performance issues with this specific solenoid that regulates transmission line pressure.

Common Causes

35%

Failed pressure control solenoid 'H' with internal electrical or mechanical fault

Pressure Control Solenoid H

25%

Damaged wiring harness or corroded connectors in solenoid 'H' circuit

Transmission Wiring Harness
Connector Terminals

20%

Low or contaminated transmission fluid affecting solenoid operation

Transmission Fluid
Transmission Filter

12%

Clogged valve body passages or stuck valve preventing proper pressure control

Valve Body
Pressure Control Valve

8%

Failed TCM unable to properly control solenoid 'H'

Transmission Control Module

Diagnostic Steps

1

Step 1: Check transmission fluid level and condition; verify proper fluid type is installed

2

Step 2: Inspect transmission wiring harness and connectors for damage, corrosion, or moisture intrusion

3

Step 3: Measure resistance of pressure control solenoid 'H' and compare to manufacturer specifications

4

Step 4: Monitor live data for solenoid command duty cycle and actual pressure response

5

Step 5: Test solenoid circuit voltage and ground integrity with key on engine running

Estimated Repair Cost

$250 - $850

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P2816 mean?

The TCM has detected a general fault with pressure control solenoid 'H'. This is a broader code indicating electrical or performance issues with this specific solenoid that regulates transmission line pressure.

What causes P2816?

The most common cause of P2816 (Pressure Control Solenoid "H") is: Failed pressure control solenoid 'H' with internal electrical or mechanical fault

How much does it cost to fix P2816?

Typical repair costs for P2816 range from $250 to $850, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P2816?

Vehicle may experience erratic shifting, transmission slipping, or fail-safe mode activation. Continued operation without repair may result in transmission damage.

How do I diagnose P2816?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P2816 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Transmission

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.