OBDHut

OBDHut

P2815

Moderate

Pressure Control Solenoid "G" Control Circuit High

What Does P2815 Mean?

The TCM has detected abnormally high voltage in the pressure control solenoid 'G' control circuit. This indicates the circuit voltage exceeds the maximum threshold, typically due to an open ground or short to power.

Common Causes

35%

Open ground circuit preventing solenoid from completing electrical path

Ground Wire
Ground Connection

25%

Open circuit in solenoid control wire between TCM and solenoid

Transmission Wiring Harness

20%

Failed pressure control solenoid 'G' with internal open circuit

Pressure Control Solenoid G

12%

Short to voltage source in wiring harness

Wiring Harness

8%

Failed TCM driver circuit unable to pull voltage low

Transmission Control Module

Diagnostic Steps

1

Step 1: Check all ground connections for transmission control system; verify continuity and clean corrosion

2

Step 2: Measure voltage at solenoid connector with key on; excessive voltage confirms high circuit condition

3

Step 3: Disconnect solenoid and measure circuit voltage; if voltage drops to normal, solenoid is open

4

Step 4: Check for short to power by measuring voltage on control wire with TCM disconnected

5

Step 5: Test TCM ground circuits and verify TCM has proper power supply and ground

Estimated Repair Cost

$200 - $950

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P2815 mean?

The TCM has detected abnormally high voltage in the pressure control solenoid 'G' control circuit. This indicates the circuit voltage exceeds the maximum threshold, typically due to an open ground or short to power.

What causes P2815?

The most common cause of P2815 (Pressure Control Solenoid "G" Control Circuit High) is: Open ground circuit preventing solenoid from completing electrical path

How much does it cost to fix P2815?

Typical repair costs for P2815 range from $200 to $950, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P2815?

Transmission will likely operate in fail-safe mode with limited functionality. Vehicle may experience reduced power and limited gear selection.

How do I diagnose P2815?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P2815 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Transmission

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.