OBDHut

OBDHut

P2761

Moderate

Torque Converter Clutch Pressure Control Solenoid Control Circuit/Open

What Does P2761 Mean?

The TCM has detected an open circuit in the TCC pressure control solenoid control circuit. This means there is a break in the electrical path preventing current flow, indicating a complete loss of electrical continuity between the TCM and solenoid.

Common Causes

35%

Broken wire in transmission wiring harness

Transmission Wiring Harness
Internal Harness

30%

Disconnected or badly corroded transmission connector

Transmission External Connector
Connector Terminals

20%

Open circuit within TCC pressure control solenoid

TCC Pressure Control Solenoid

10%

Damaged internal transmission harness or connector

Internal Transmission Connector
Solenoid Pigtail

5%

Failed TCM output driver circuit

Transmission Control Module
PCM

Diagnostic Steps

1

Step 1: Visually inspect transmission external connector for disconnection, damage, or pushed-out pins

2

Step 2: Measure resistance from TCM connector to solenoid connector (should be less than 1 ohm)

3

Step 3: Disconnect solenoid and measure resistance of solenoid itself (typically 10-30 ohms)

4

Step 4: Backprobe TCM connector and check for battery voltage on power supply circuit with key on

5

Step 5: If external wiring is good, remove transmission pan to inspect internal harness and solenoid connection

Estimated Repair Cost

$150 - $1,200

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P2761 mean?

The TCM has detected an open circuit in the TCC pressure control solenoid control circuit. This means there is a break in the electrical path preventing current flow, indicating a complete loss of electrical continuity between the TCM and solenoid.

What causes P2761?

The most common cause of P2761 (Torque Converter Clutch Pressure Control Solenoid Control Circuit/Open) is: Broken wire in transmission wiring harness

How much does it cost to fix P2761?

Typical repair costs for P2761 range from $150 to $1,200, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P2761?

Vehicle remains drivable but torque converter will not lock, resulting in poor fuel economy and increased transmission temperatures. Extended driving may cause transmission damage.

How do I diagnose P2761?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P2761 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Automatic Transmission

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.