OBDHut

OBDHut

P2750

Moderate

Intermediate Shaft Speed Sensor C Circuit Range/Performance

What Does P2750 Mean?

The intermediate shaft speed sensor C is providing readings that are implausible or inconsistent with other transmission sensors. The TCM detects that sensor C output does not correlate properly with input/output shaft speeds or vehicle speed.

Common Causes

40%

Faulty intermediate shaft speed sensor C producing erratic signal

Intermediate Shaft Speed Sensor C

25%

Worn or damaged reluctor ring/tone wheel on intermediate shaft

Reluctor Ring
Tone Wheel

20%

Internal transmission mechanical issues causing abnormal shaft speeds

Transmission Internal Components

10%

Excessive air gap between sensor and reluctor ring

Sensor Mounting

5%

Intermittent wiring connection causing signal dropout

Wiring Harness
Connector

Diagnostic Steps

1

Step 1: Compare intermediate shaft speed sensor C readings to input and output speed sensor data in live data

2

Step 2: Inspect sensor mounting position and air gap to reluctor ring

3

Step 3: Check for metal debris on sensor tip indicating internal transmission wear

4

Step 4: Road test vehicle while monitoring all speed sensor inputs for correlation

5

Step 5: Perform transmission fluid inspection for contamination or metal particles

Estimated Repair Cost

$200 - $1,500

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P2750 mean?

The intermediate shaft speed sensor C is providing readings that are implausible or inconsistent with other transmission sensors. The TCM detects that sensor C output does not correlate properly with input/output shaft speeds or vehicle speed.

What causes P2750?

The most common cause of P2750 (Intermediate Shaft Speed Sensor C Circuit Range/Performance) is: Faulty intermediate shaft speed sensor C producing erratic signal

How much does it cost to fix P2750?

Typical repair costs for P2750 range from $200 to $1,500, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P2750?

Transmission may shift erratically or unexpectedly. Vehicle may enter fail-safe mode with limited gear operation. Drive cautiously and seek repair soon.

How do I diagnose P2750?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P2750 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Automatic Transmission

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.