OBDHut

OBDHut

P2735

Difficult

Pressure Control Solenoid "F" Intermittent

What Does P2735 Mean?

The TCM has detected an intermittent fault with pressure control solenoid F or its circuit. The problem occurs sporadically, making diagnosis more challenging as the fault is not constant.

Common Causes

35%

Intermittent connection at solenoid F connector due to corrosion or loose pins

Connector
Pins

30%

Chafed or damaged wiring with intermittent short or open

Wiring Harness

20%

Pressure control solenoid F with intermittent internal failure

Pressure Control Solenoid F

10%

Temperature-sensitive failure in solenoid or wiring

Solenoid F
Wiring

5%

Intermittent TCM ground or power supply issue

Ground Connection
TCM

Diagnostic Steps

1

Step 1: Wiggle test all wiring and connectors to solenoid F while monitoring live data for signal dropout

2

Step 2: Thoroughly inspect connector pins for spread terminals, corrosion, or poor contact

3

Step 3: Check for wiring harness routing near heat sources or moving components causing intermittent chafing

4

Step 4: Monitor solenoid F operation through multiple heat cycles (cold to operating temperature)

5

Step 5: Use freeze frame data to identify conditions present when fault occurred (temperature, speed, gear)

Estimated Repair Cost

$150 - $1,000

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P2735 mean?

The TCM has detected an intermittent fault with pressure control solenoid F or its circuit. The problem occurs sporadically, making diagnosis more challenging as the fault is not constant.

What causes P2735?

The most common cause of P2735 (Pressure Control Solenoid "F" Intermittent) is: Intermittent connection at solenoid F connector due to corrosion or loose pins

How much does it cost to fix P2735?

Typical repair costs for P2735 range from $150 to $1,000, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P2735?

Intermittent shifting issues may occur unpredictably. Vehicle is generally safe to drive but the problem may worsen over time if not addressed.

How do I diagnose P2735?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P2735 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Automatic Transmission

Difficulty

Difficult

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.