OBDHut

OBDHut

P2730

Moderate

Pressure Control Solenoid "E" Control Circuit High

What Does P2730 Mean?

The Transmission Control Module (TCM) has detected an abnormally high voltage in the control circuit for pressure control solenoid E. This typically indicates a short to voltage in the wiring or a failed solenoid.

Common Causes

35%

Short to voltage in pressure control solenoid E wiring harness

Wiring Harness
Connector

30%

Failed pressure control solenoid E with internal short

Pressure Control Solenoid E

20%

Transmission control module (TCM) internal fault

TCM

10%

Corroded or damaged solenoid connector causing high resistance

Connector Pins

5%

Chafed wiring creating intermittent short to power

Wiring Harness

Diagnostic Steps

1

Step 1: Visually inspect the pressure control solenoid E connector and wiring for damage, corrosion, or chafing

2

Step 2: Disconnect the solenoid E connector and measure resistance across solenoid terminals (typically 3-10 ohms)

3

Step 3: With connector disconnected, check for voltage on the TCM control wire (should be 0V with key on)

4

Step 4: If voltage is present at TCM connector with solenoid disconnected, repair short to voltage in harness

5

Step 5: If wiring checks good, replace pressure control solenoid E and retest

Estimated Repair Cost

$200 - $800

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P2730 mean?

The Transmission Control Module (TCM) has detected an abnormally high voltage in the control circuit for pressure control solenoid E. This typically indicates a short to voltage in the wiring or a failed solenoid.

What causes P2730?

The most common cause of P2730 (Pressure Control Solenoid "E" Control Circuit High) is: Short to voltage in pressure control solenoid E wiring harness

How much does it cost to fix P2730?

Typical repair costs for P2730 range from $200 to $800, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P2730?

Vehicle may experience harsh shifting, transmission slipping, or enter limp mode limiting speed. Safe to drive short distances to a repair facility but avoid highway speeds.

How do I diagnose P2730?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P2730 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Automatic Transmission

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.