OBDHut

OBDHut

P2660

Moderate

B Rocker Arm Actuator Control Circuit/Open Bank 2

What Does P2660 Mean?

The PCM has detected an open circuit or excessive resistance in the control circuit for the Bank 2 'B' rocker arm actuator. This prevents the PCM from commanding the actuator to engage or disengage variable valve timing or cylinder deactivation.

Common Causes

35%

Open circuit in actuator control wiring or broken wire

Engine Wiring Harness
Actuator Control Wire

30%

Failed rocker arm actuator solenoid with open coil winding

Rocker Arm Actuator Solenoid
VVT Solenoid

20%

Damaged or disconnected electrical connector

Actuator Connector
Connector Terminals

10%

Blown fuse or open circuit in power supply to actuator

Engine Control Fuse
Power Distribution Module

5%

PCM internal driver circuit failure

PCM
ECM

Diagnostic Steps

1

Step 1: Inspect the rocker arm actuator connector for secure connection, corrosion, or damaged pins

2

Step 2: Disconnect the actuator and measure resistance across solenoid terminals (typical specification 5-30 ohms); infinite resistance indicates open coil

3

Step 3: Check for power and ground at the actuator connector with key on; should have battery voltage on one pin and PCM-controlled ground on the other

4

Step 4: If actuator tests bad, replace it; if actuator tests good, check wiring continuity from PCM to actuator connector for open circuits

5

Step 5: Verify related fuses and relays in the engine control power distribution circuit are intact

Estimated Repair Cost

$180 - $700

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P2660 mean?

The PCM has detected an open circuit or excessive resistance in the control circuit for the Bank 2 'B' rocker arm actuator. This prevents the PCM from commanding the actuator to engage or disengage variable valve timing or cylinder deactivation.

What causes P2660?

The most common cause of P2660 (B Rocker Arm Actuator Control Circuit/Open Bank 2) is: Open circuit in actuator control wiring or broken wire

How much does it cost to fix P2660?

Typical repair costs for P2660 range from $180 to $700, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P2660?

Vehicle remains safe to drive but will operate with reduced performance and fuel economy. The affected bank will run with default valve timing, causing potential rough idle and reduced power.

How do I diagnose P2660?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P2660 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Variable Valve Timing / Cylinder Deactivation System

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.