OBDHut

OBDHut

P2626

Moderate

O2 Sensor Pumping Current Trim Circuit/Open Bank 1 Sensor 1

What Does P2626 Mean?

The oxygen sensor's pumping current trim circuit for Bank 1 Sensor 1 (upstream sensor) has an open circuit or electrical fault. This indicates the PCM cannot properly control the wide-band oxygen sensor's pumping cell used for precise air/fuel ratio measurement.

Common Causes

45%

Faulty oxygen sensor internal circuit or pumping cell failure

O2 Sensor Bank 1 Sensor 1
Oxygen Sensor

30%

Damaged or corroded wiring harness or connector to O2 sensor

O2 Sensor Wiring Harness
Connector

15%

Poor ground connection at sensor or ECM

Ground Wire
Ground Terminal

10%

PCM/ECM internal driver circuit failure

Engine Control Module
PCM

Diagnostic Steps

1

Step 1: Visually inspect O2 sensor connector and wiring for damage, corrosion, or loose connections

2

Step 2: Check sensor ground circuits for continuity and resistance (should be less than 1 ohm to chassis ground)

3

Step 3: Measure pumping current circuit voltage and resistance at sensor connector per manufacturer specifications

4

Step 4: Monitor O2 sensor data PIDs for abnormal readings or lack of signal

5

Step 5: If wiring and grounds are good, replace O2 sensor and retest; if problem persists, test PCM driver circuit

Estimated Repair Cost

$200 - $600

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P2626 mean?

The oxygen sensor's pumping current trim circuit for Bank 1 Sensor 1 (upstream sensor) has an open circuit or electrical fault. This indicates the PCM cannot properly control the wide-band oxygen sensor's pumping cell used for precise air/fuel ratio measurement.

What causes P2626?

The most common cause of P2626 (O2 Sensor Pumping Current Trim Circuit/Open Bank 1 Sensor 1) is: Faulty oxygen sensor internal circuit or pumping cell failure

How much does it cost to fix P2626?

Typical repair costs for P2626 range from $200 to $600, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P2626?

Safe to drive short distances but fuel economy will suffer and emissions will increase. Extended driving may damage catalytic converter.

How do I diagnose P2626?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P2626 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Emissions Control System

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.