OBDHut

OBDHut

P2624

Critical
Moderate

Injector Control Pressure Regulator Circuit Low

What Does P2624 Mean?

The PCM has detected abnormally low voltage or current in the injector control pressure regulator circuit. This indicates a short to ground or excessive resistance in the fuel pressure control system.

Safety Warning

Loss of fuel pressure control will cause engine performance issues, potential no-start, or engine stalling. Do not operate under heavy load.

Common Causes

30%

Wiring shorted to ground in injector pressure regulator circuit

Wiring harness
Electrical connectors

35%

Failed injector control pressure regulator with internal short

Injector control pressure regulator
ICP valve

20%

Oil or fuel contamination in connector causing short circuit

ICP regulator connector
Connector seals

15%

PCM internal fault with shorted output driver

PCM
Engine control module

Diagnostic Steps

1

Step 1: Disconnect injector pressure regulator connector and measure resistance to ground (should be >10k ohms)

2

Step 2: Inspect connector and pins for oil/fuel contamination, moisture, or corrosion

3

Step 3: Measure injector pressure regulator solenoid resistance and compare to specifications

4

Step 4: Check for damaged wiring where harness routes near hot or moving components

5

Step 5: Monitor PCM output voltage/current at connector with regulator disconnected to verify PCM function

Estimated Repair Cost

$250 - $1,500

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P2624 mean?

The PCM has detected abnormally low voltage or current in the injector control pressure regulator circuit. This indicates a short to ground or excessive resistance in the fuel pressure control system.

What causes P2624?

The most common cause of P2624 (Injector Control Pressure Regulator Circuit Low) is: Wiring shorted to ground in injector pressure regulator circuit

How much does it cost to fix P2624?

Typical repair costs for P2624 range from $250 to $1,500, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P2624?

Loss of fuel pressure control will cause engine performance issues, potential no-start, or engine stalling. Do not operate under heavy load.

How do I diagnose P2624?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P2624 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Diesel Fuel Injection System

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.