OBDHut

OBDHut

P2622

Critical
Moderate

Throttle Position Output Circuit High

What Does P2622 Mean?

The PCM has detected abnormally high voltage in the throttle position output circuit. This typically indicates a short to power or an open ground in the throttle control system.

Safety Warning

Engine may run at unintended speed or enter limp mode. Vehicle is unsafe to drive until repaired due to potential loss of throttle control.

Common Causes

35%

Wiring shorted to battery voltage in throttle position output circuit

Wiring harness
Electrical connectors

30%

Open or high resistance in ground circuit for throttle actuator

Ground wire
Ground connection
Throttle body ground

20%

Failed throttle body actuator with internal fault

Electronic throttle body
Throttle actuator

15%

PCM internal fault with failed output driver

PCM

Diagnostic Steps

1

Step 1: Check all ground connections for throttle body and PCM for tightness and corrosion

2

Step 2: Disconnect throttle body and check for unwanted voltage on control wires (should be 0V with key off)

3

Step 3: Inspect wiring harness for shorts to power, especially near battery and alternator

4

Step 4: Measure throttle motor circuit resistance and verify ground circuit continuity (<0.5 ohms)

5

Step 5: Verify PCM output signal voltage stays within normal operating range (typically 0-5V or 0-12V PWM)

Estimated Repair Cost

$200 - $1,200

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P2622 mean?

The PCM has detected abnormally high voltage in the throttle position output circuit. This typically indicates a short to power or an open ground in the throttle control system.

What causes P2622?

The most common cause of P2622 (Throttle Position Output Circuit High) is: Wiring shorted to battery voltage in throttle position output circuit

How much does it cost to fix P2622?

Typical repair costs for P2622 range from $200 to $1,200, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P2622?

Engine may run at unintended speed or enter limp mode. Vehicle is unsafe to drive until repaired due to potential loss of throttle control.

How do I diagnose P2622?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P2622 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Electronic Throttle Control

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.