OBDHut

OBDHut

P2480

Moderate

Exhaust Gas Temperature Sensor Circuit/Open Bank 1 Sensor 5

What Does P2480 Mean?

The PCM has detected an open circuit or complete loss of signal from exhaust gas temperature sensor 5 on bank 1. This indicates no communication between the sensor and control module. Sensor 5 is typically located furthest downstream in modern diesel exhaust systems.

Common Causes

35%

Broken or disconnected wiring to EGT sensor 5

Sensor Wiring Harness
Connector

30%

Failed EGT sensor with internal open circuit

EGT Sensor 5 Bank 1

20%

Corroded or damaged connector terminals preventing electrical contact

Connector Terminals
Connector Body

10%

Damaged sensor mounting causing internal sensor failure

EGT Sensor 5 Bank 1
Sensor Mounting Bung

5%

PCM internal circuit failure for sensor input

Powertrain Control Module

Diagnostic Steps

1

Step 1: Inspect sensor connector for corrosion, bent pins, or moisture intrusion and clean/repair as needed

2

Step 2: Check wiring harness from sensor to PCM for cuts, abrasion, or melted insulation from exhaust heat

3

Step 3: Measure sensor resistance (should be 200-500 ohms typically); infinite resistance indicates open sensor

4

Step 4: Check continuity from sensor connector through to PCM connector on both signal and ground circuits

5

Step 5: If wiring is intact, replace sensor and verify proper installation torque and sealing

Estimated Repair Cost

$180 - $650

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P2480 mean?

The PCM has detected an open circuit or complete loss of signal from exhaust gas temperature sensor 5 on bank 1. This indicates no communication between the sensor and control module. Sensor 5 is typically located furthest downstream in modern diesel exhaust systems.

What causes P2480?

The most common cause of P2480 (Exhaust Gas Temperature Sensor Circuit/Open Bank 1 Sensor 5) is: Broken or disconnected wiring to EGT sensor 5

How much does it cost to fix P2480?

Typical repair costs for P2480 range from $180 to $650, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P2480?

Generally safe to drive, but emissions system may not function optimally. DPF regeneration may be affected, potentially causing damage if ignored long-term.

How do I diagnose P2480?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P2480 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Emissions Control System

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.