OBDHut

OBDHut

P2435

Moderate

Secondary Air Injection System Air Flow/Pressure Sensor Circuit Bank 2

What Does P2435 Mean?

The PCM has detected a fault in the secondary air injection system air flow or pressure sensor circuit on Bank 2. This is a general circuit malfunction code indicating the sensor signal is not functioning properly but doesn't specify whether high, low, or intermittent.

Common Causes

35%

Failed secondary air pressure/flow sensor

Secondary Air Pressure Sensor Bank 2

30%

Damaged wiring or connector to Bank 2 sensor

Wiring Harness
Connector

20%

Corroded or loose sensor connector

Connector Terminals

10%

Short or open in sensor signal circuit

Wiring Harness

5%

Failed PCM (rare)

Powertrain Control Module

Diagnostic Steps

1

Step 1: Visually inspect Bank 2 secondary air pressure sensor, connector, and wiring for damage, corrosion, or loose connections

2

Step 2: Check sensor signal voltage at the sensor connector with key on, engine off (typical range 0.5-4.5V)

3

Step 3: Verify sensor power supply (typically 5V reference) and ground circuits are functioning properly

4

Step 4: Test wiring continuity from sensor connector to PCM and check for shorts to ground or power

5

Step 5: If circuits test within specifications, replace Bank 2 secondary air pressure sensor and verify repair

Estimated Repair Cost

$150 - $400

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P2435 mean?

The PCM has detected a fault in the secondary air injection system air flow or pressure sensor circuit on Bank 2. This is a general circuit malfunction code indicating the sensor signal is not functioning properly but doesn't specify whether high, low, or intermittent.

What causes P2435?

The most common cause of P2435 (Secondary Air Injection System Air Flow/Pressure Sensor Circuit Bank 2) is: Failed secondary air pressure/flow sensor

How much does it cost to fix P2435?

Typical repair costs for P2435 range from $150 to $400, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P2435?

Vehicle is safe to drive. This fault affects emissions compliance and may cause increased cold-start emissions and failure of emissions testing.

How do I diagnose P2435?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P2435 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Emissions Control System - Secondary Air Injection

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.