OBDHut

OBDHut

P216E

Critical
Moderate

Fuel Injector Group "F" Supply Voltage Circuit Low

What Does P216E Mean?

The PCM has detected abnormally low voltage in the power supply circuit feeding fuel injector group F. This indicates a problem with the injector driver circuit, wiring, or power supply to this specific bank of injectors.

Safety Warning

Engine may run rough, misfire, or fail to start. If drivable, reduced power and poor fuel economy are likely, with potential catalytic converter damage from misfires.

Common Causes

35%

Damaged or chafed wiring harness causing short to ground

Injector Harness
Wiring

25%

Faulty fuel injector driver circuit in PCM/ECM

PCM
ECM

20%

Failed fuel injector with internal short

Fuel Injector

15%

Corroded or loose connector at injector or PCM

Electrical Connector
Terminals

5%

Blown fuse or faulty injector power relay

Fuse
Relay

Diagnostic Steps

1

Step 1: Inspect fuel injector group F wiring harness for damage, chafing, or shorts to ground

2

Step 2: Check all connectors for corrosion, bent pins, and proper seating at injectors and PCM

3

Step 3: Measure voltage at injector supply circuit with key on, engine off (should read battery voltage)

4

Step 4: Test individual injector resistance and compare to specifications

5

Step 5: If all wiring and injectors test good, suspect PCM injector driver circuit failure

Estimated Repair Cost

$150 - $1,200

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P216E mean?

The PCM has detected abnormally low voltage in the power supply circuit feeding fuel injector group F. This indicates a problem with the injector driver circuit, wiring, or power supply to this specific bank of injectors.

What causes P216E?

The most common cause of P216E (Fuel Injector Group "F" Supply Voltage Circuit Low) is: Damaged or chafed wiring harness causing short to ground

How much does it cost to fix P216E?

Typical repair costs for P216E range from $150 to $1,200, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P216E?

Engine may run rough, misfire, or fail to start. If drivable, reduced power and poor fuel economy are likely, with potential catalytic converter damage from misfires.

How do I diagnose P216E?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P216E to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Fuel Injection System

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.