OBDHut

OBDHut

P210C

Critical
Moderate

Throttle Actuator "B" Control Motor Circuit Low

What Does P210C Mean?

The PCM has detected an abnormally low voltage or current in the secondary throttle actuator motor control circuit. This indicates a short to ground or excessive resistance in the circuit.

Safety Warning

Vehicle will likely enter limp mode with severely limited power. May experience sudden throttle cutoff creating hazardous conditions in traffic or highway speeds.

Common Causes

35%

Short to ground in throttle actuator motor wiring

Wiring Harness
Throttle Body Wiring

30%

Internal short in throttle actuator motor windings

Throttle Actuator Motor
Throttle Body Assembly

20%

Damaged or shorted throttle body connector

Throttle Body Connector
Connector Pins

15%

PCM internal short or driver circuit failure

Powertrain Control Module

Diagnostic Steps

1

Step 1: Disconnect throttle body connector and check for short to ground on motor control circuits using multimeter

2

Step 2: Measure resistance of throttle actuator motor between terminals and to ground (should be open to ground)

3

Step 3: Inspect wiring harness for pinched, chafed, or damaged wires near hot or sharp components

4

Step 4: Check for moisture or corrosion inside throttle body connector that could cause shorting

5

Step 5: If circuits test normal, substitute known-good PCM or test PCM driver circuits

Estimated Repair Cost

$150 - $1,500

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P210C mean?

The PCM has detected an abnormally low voltage or current in the secondary throttle actuator motor control circuit. This indicates a short to ground or excessive resistance in the circuit.

What causes P210C?

The most common cause of P210C (Throttle Actuator "B" Control Motor Circuit Low) is: Short to ground in throttle actuator motor wiring

How much does it cost to fix P210C?

Typical repair costs for P210C range from $150 to $1,500, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P210C?

Vehicle will likely enter limp mode with severely limited power. May experience sudden throttle cutoff creating hazardous conditions in traffic or highway speeds.

How do I diagnose P210C?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P210C to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Electronic Throttle Control

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.