OBDHut

OBDHut

P2094

Moderate

B Camshaft Position Actuator Control Circuit Low Bank 2

What Does P2094 Mean?

The ECM has detected a lower than expected voltage or resistance in the exhaust camshaft position actuator control circuit for Bank 2. This points to a short to ground, open circuit, or failed exhaust VVT solenoid.

Common Causes

35%

Faulty exhaust camshaft position actuator solenoid (VVT solenoid)

Exhaust VVT Solenoid
Oil Control Valve

30%

Damaged wiring or connector at exhaust VVT solenoid

Wiring Harness
Connector

20%

Corrosion in electrical connector terminals

Connector Terminals
Pins

10%

Low oil level or wrong oil viscosity affecting solenoid

Engine Oil

5%

ECM internal fault

Engine Control Module

Diagnostic Steps

1

Step 1: Check engine oil level and condition; ensure proper grade oil is used per manufacturer specs

2

Step 2: Inspect exhaust VVT solenoid connector on Bank 2 for damage, corrosion, or oil contamination

3

Step 3: Disconnect solenoid and measure resistance (typically 6-12 ohms); check for open or short

4

Step 4: Test wiring from ECM to solenoid for continuity, shorts to ground, and voltage supply

5

Step 5: If components and wiring test within specs, perform ECM output driver test or consider ECM replacement

Estimated Repair Cost

$150 - $450

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P2094 mean?

The ECM has detected a lower than expected voltage or resistance in the exhaust camshaft position actuator control circuit for Bank 2. This points to a short to ground, open circuit, or failed exhaust VVT solenoid.

What causes P2094?

The most common cause of P2094 (B Camshaft Position Actuator Control Circuit Low Bank 2) is: Faulty exhaust camshaft position actuator solenoid (VVT solenoid)

How much does it cost to fix P2094?

Typical repair costs for P2094 range from $150 to $450, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P2094?

Vehicle can be driven cautiously but will experience reduced performance and fuel economy. Prolonged operation may lead to engine damage or increased emissions.

How do I diagnose P2094?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P2094 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Variable Valve Timing System

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.