OBDHut

OBDHut

P207D

Moderate

Intake Manifold Tuning (IMT) Valve Position Sensor/Switch Circuit High Bank 2

What Does P207D Mean?

The intake manifold tuning valve position sensor circuit on Bank 2 is reading an abnormally high voltage signal. This indicates either a short to voltage, sensor failure, or wiring issue preventing proper variable intake manifold operation.

Common Causes

35%

Faulty IMT valve position sensor

IMT Position Sensor
Intake Manifold Tuning Valve Assembly

30%

Wiring harness short to voltage or damaged connector pins

Wiring Harness
Connector

20%

Corroded or damaged sensor connector causing poor ground

Sensor Connector
Ground Circuit

10%

Failed PCM internal circuit or driver

Powertrain Control Module

5%

Broken or binding IMT valve actuator causing abnormal feedback

IMT Valve Actuator
Intake Manifold Runner Control

Diagnostic Steps

1

Step 1: Inspect the IMT valve position sensor connector for corrosion, damage, or moisture and repair as needed

2

Step 2: Check sensor voltage at rest and during commanded operation using live data; should read 0.5-4.5V depending on position

3

Step 3: Disconnect sensor and measure reference voltage (typically 5V) and ground circuit integrity at the harness connector

4

Step 4: Test sensor resistance according to manufacturer specifications and compare to known-good values

5

Step 5: If all circuits and sensor test normal, suspect PCM issue or mechanical binding of the IMT valve preventing proper operation

Estimated Repair Cost

$150 - $600

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P207D mean?

The intake manifold tuning valve position sensor circuit on Bank 2 is reading an abnormally high voltage signal. This indicates either a short to voltage, sensor failure, or wiring issue preventing proper variable intake manifold operation.

What causes P207D?

The most common cause of P207D (Intake Manifold Tuning (IMT) Valve Position Sensor/Switch Circuit High Bank 2) is: Faulty IMT valve position sensor

How much does it cost to fix P207D?

Typical repair costs for P207D range from $150 to $600, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P207D?

Vehicle is safe to drive but may experience reduced power, poor fuel economy, and rough idle. Performance will be noticeably diminished especially at higher RPMs.

How do I diagnose P207D?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P207D to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Intake Air System

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.