OBDHut

OBDHut

P2067

Moderate

Fuel Level Sensor "B" Circuit Low

What Does P2067 Mean?

The control module has detected abnormally low voltage or resistance from fuel level sensor B circuit, indicating the sensor is reading at or near empty position constantly. This suggests a short to ground or internal sensor failure.

Common Causes

35%

Wiring harness shorted to ground between sensor and control module

Wiring Harness

30%

Failed fuel level sensor with internal short or resistor card failure

Fuel Level Sensor B

20%

Damaged or corroded connector pins causing short to ground

Sensor Connector

10%

Float arm stuck in empty position due to mechanical binding

Fuel Level Sensor B
Float Assembly

5%

Fuel contamination causing conductive deposits on sensor components

Fuel Level Sensor B

Diagnostic Steps

1

Step 1: Disconnect fuel level sensor B connector and measure resistance; should show infinite resistance to ground

2

Step 2: Measure voltage at control module connector on signal wire with sensor disconnected; should read approximately 5V

3

Step 3: Inspect wiring harness routing for pinch points or areas of chafing that could cause ground short

4

Step 4: Remove sensor and inspect float arm for binding and resistor card for damage or shorting

5

Step 5: Perform resistance sweep test by manually moving float through entire range while monitoring ohms

Estimated Repair Cost

$200 - $600

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P2067 mean?

The control module has detected abnormally low voltage or resistance from fuel level sensor B circuit, indicating the sensor is reading at or near empty position constantly. This suggests a short to ground or internal sensor failure.

What causes P2067?

The most common cause of P2067 (Fuel Level Sensor "B" Circuit Low) is: Wiring harness shorted to ground between sensor and control module

How much does it cost to fix P2067?

Typical repair costs for P2067 range from $200 to $600, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P2067?

Safe to drive but fuel gauge will incorrectly show empty or very low. Driver must manually track fuel consumption to avoid running out of fuel.

How do I diagnose P2067?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P2067 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Fuel System (Monitoring)

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.