OBDHut

OBDHut

P2064

Moderate

Reductant/Regeneration Supply Control Circuit High

What Does P2064 Mean?

The control module has detected an abnormally high voltage signal in the reductant or regeneration supply control circuit, exceeding acceptable operating parameters. This indicates a short to power or open load condition.

Common Causes

35%

Wiring harness damaged with short to battery voltage or other power source

Wiring Harness

25%

Open circuit in reductant valve/injector creating high voltage feedback

DEF Injector
Reductant Valve

20%

Failed control relay stuck closed providing constant power

Reductant Supply Relay

15%

Corroded or backed-out connector pins causing intermittent high resistance

Connectors

5%

Control module internal driver circuit failure creating false high signal

Engine Control Module

Diagnostic Steps

1

Step 1: Disconnect reductant valve/injector and measure voltage at control circuit with key on; should read near 0V

2

Step 2: Inspect wiring harness for damage, especially near heat sources or moving components

3

Step 3: Test reductant supply relay for proper operation and check for stuck contacts

4

Step 4: Measure resistance of reductant valve/injector coil for open circuit condition

5

Step 5: Check connector terminal fit and inspect for corrosion or poor contact causing high resistance

Estimated Repair Cost

$150 - $1,100

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P2064 mean?

The control module has detected an abnormally high voltage signal in the reductant or regeneration supply control circuit, exceeding acceptable operating parameters. This indicates a short to power or open load condition.

What causes P2064?

The most common cause of P2064 (Reductant/Regeneration Supply Control Circuit High) is: Wiring harness damaged with short to battery voltage or other power source

How much does it cost to fix P2064?

Typical repair costs for P2064 range from $150 to $1,100, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P2064?

Vehicle remains safe to operate but emission control system is not functioning. Engine derate may occur after programmed grace period.

How do I diagnose P2064?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P2064 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Emissions Control System (Diesel Aftertreatment)

Difficulty

Moderate

Type

Generic (SAE)

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.