OBDHut

OBDHut

P1792

Moderate

Transmission Range Display Circ. Short to B+

What Does P1792 Mean?

The transmission range display circuit has a short to battery voltage (B+), sending constant power where a signal wire should be. This prevents accurate gear position communication to the instrument cluster.

Common Causes

50%

Wiring harness damaged with wire contacting power source or adjacent power wire

Wiring Harness
Wire Insulation

25%

Corroded connector causing cross-circuit contamination between power and signal pins

Electrical Connector
Connector Pins

15%

Failed transmission range sensor with internal short to power

Transmission Range Sensor
PRNDL Sensor

10%

Instrument cluster internal circuit board failure

Instrument Cluster
Circuit Board

Diagnostic Steps

1

Step 1: Disconnect transmission range sensor connector and measure voltage on display circuit wire (should read 0V with sensor disconnected)

2

Step 2: Inspect wiring harness routing for contact with power wires, especially near heat sources or moving components

3

Step 3: Check for corrosion or melted connector housings that could cause pin-to-pin shorts

4

Step 4: Use a wiring diagram to identify adjacent circuits and probe for voltage bleed from nearby power sources

5

Step 5: Test instrument cluster by disconnecting it and rechecking circuit voltage to isolate cluster as fault source

Estimated Repair Cost

$150 - $650

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P1792 mean?

The transmission range display circuit has a short to battery voltage (B+), sending constant power where a signal wire should be. This prevents accurate gear position communication to the instrument cluster.

What causes P1792?

The most common cause of P1792 (Transmission Range Display Circ. Short to B+) is: Wiring harness damaged with wire contacting power source or adjacent power wire

How much does it cost to fix P1792?

Typical repair costs for P1792 range from $150 to $650, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P1792?

Driver cannot reliably determine transmission gear position. May prevent vehicle starting if safety interlock system is compromised.

How do I diagnose P1792?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P1792 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Transmission Control and Display

Difficulty

Moderate

Type

Manufacturer

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.