OBDHut

OBDHut

P1532

Moderate

"B" Camshaft Position Actuator Control Open Circuit Bank 2

What Does P1532 Mean?

The PCM has detected an open circuit in the control circuit for the 'B' camshaft position actuator (typically exhaust cam) on Bank 2. This disrupts proper variable valve timing operation on the second cylinder bank.

Common Causes

35%

Damaged or broken wiring in the camshaft actuator control circuit

Wiring harness
Connector pins

30%

Failed camshaft position actuator solenoid coil

Camshaft actuator solenoid
VVT solenoid

20%

Corroded or loose electrical connector at actuator

Electrical connector
Connector terminals

10%

Failed PCM driver circuit

Powertrain Control Module

5%

Blown fuse in actuator control circuit

Fuse

Diagnostic Steps

1

Step 1: Visually inspect wiring harness and connector at Bank 2 exhaust camshaft actuator for damage, corrosion, or loose connections

2

Step 2: Use a multimeter to check for continuity in the control circuit from PCM to actuator and verify open circuit

3

Step 3: Measure resistance of camshaft actuator solenoid coil (typical spec 6-12 ohms); replace if out of range or infinite resistance

4

Step 4: Check voltage supply and ground circuits at actuator connector with ignition on

5

Step 5: If all circuits test good, perform PCM driver circuit test or suspect PCM failure

Estimated Repair Cost

$150 - $600

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P1532 mean?

The PCM has detected an open circuit in the control circuit for the 'B' camshaft position actuator (typically exhaust cam) on Bank 2. This disrupts proper variable valve timing operation on the second cylinder bank.

What causes P1532?

The most common cause of P1532 ("B" Camshaft Position Actuator Control Open Circuit Bank 2) is: Damaged or broken wiring in the camshaft actuator control circuit

How much does it cost to fix P1532?

Typical repair costs for P1532 range from $150 to $600, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P1532?

Vehicle is safe to drive but may experience reduced performance, poor fuel economy, and rough idle. Extended operation may cause catalyst damage.

How do I diagnose P1532?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P1532 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Variable Valve Timing System

Difficulty

Moderate

Type

Manufacturer

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.