OBDHut

OBDHut

P1507

Moderate

Idle Speed Control Valve Open Solenoid Control Circuit Signal Low

What Does P1507 Mean?

The PCM has detected a low voltage signal on the idle speed control valve opening solenoid control circuit. This indicates the control signal is stuck low or experiencing a short to ground, affecting idle speed control valve operation.

Common Causes

40%

Short to ground in opening solenoid control circuit wiring

Wiring Harness
Connector

25%

Failed ISC valve with internal short to ground in opening solenoid

Idle Air Control Valve
ISC Solenoid

20%

PCM driver circuit failed in grounded state

PCM

15%

Damaged connector pins causing short to ground at ISC valve or PCM

Connector
Connector Pins

Diagnostic Steps

1

Step 1: Disconnect ISC valve connector and measure resistance to ground on PCM control wire (should be high resistance/open)

2

Step 2: Check for continuity to ground on control circuit with ISC disconnected and key off

3

Step 3: Inspect ISC valve connector and PCM connector for bent pins shorting to ground terminals

4

Step 4: Test opening solenoid coil resistance at ISC valve (compare to specifications)

5

Step 5: Monitor control circuit voltage at PCM connector while commanding valve operation with scan tool

Estimated Repair Cost

$120 - $550

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P1507 mean?

The PCM has detected a low voltage signal on the idle speed control valve opening solenoid control circuit. This indicates the control signal is stuck low or experiencing a short to ground, affecting idle speed control valve operation.

What causes P1507?

The most common cause of P1507 (Idle Speed Control Valve Open Solenoid Control Circuit Signal Low) is: Short to ground in opening solenoid control circuit wiring

How much does it cost to fix P1507?

Typical repair costs for P1507 range from $120 to $550, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P1507?

Idle speed control will be compromised, potentially causing rough idle, stalling, or difficulty maintaining proper idle. Stalling in traffic presents safety concerns.

How do I diagnose P1507?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P1507 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Idle Speed Control

Difficulty

Moderate

Type

Manufacturer

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.