OBDHut

OBDHut

P1495

Moderate

Secondary Air Relief Solenoid Circuit Malfunction

What Does P1495 Mean?

The PCM has detected a malfunction in the secondary air relief solenoid valve circuit. This is similar to P1490 and indicates a problem with the electrical circuit controlling the air injection relief valve.

Common Causes

40%

Defective secondary air relief solenoid valve

AIR Relief Solenoid
Relief Valve Solenoid

25%

Short to ground or power in solenoid wiring

Solenoid Harness
Wiring

20%

Corroded or damaged electrical connector

Connector
Terminal Pins

10%

Intermittent open circuit in solenoid control wiring

Control Wire
Harness

5%

Failed PCM output driver for solenoid

PCM
Engine Control Module

Diagnostic Steps

1

Step 1: Locate secondary air relief solenoid and check connector for moisture or corrosion

2

Step 2: Measure solenoid resistance with connector disconnected (should be 20-50 ohms typically)

3

Step 3: Check for short to ground by measuring resistance between each solenoid terminal and chassis ground

4

Step 4: Monitor scan tool data for PCM solenoid command status during engine warm-up

5

Step 5: Backprobe connector and verify PCM is sending proper switching signal (12V on/0V off)

Estimated Repair Cost

$150 - $475

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P1495 mean?

The PCM has detected a malfunction in the secondary air relief solenoid valve circuit. This is similar to P1490 and indicates a problem with the electrical circuit controlling the air injection relief valve.

What causes P1495?

The most common cause of P1495 (Secondary Air Relief Solenoid Circuit Malfunction) is: Defective secondary air relief solenoid valve

How much does it cost to fix P1495?

Typical repair costs for P1495 range from $150 to $475, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P1495?

Safe to continue driving. Only affects cold-start emissions reduction and may result in check engine light and emissions test failure.

How do I diagnose P1495?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P1495 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Emissions Control - Secondary Air Injection

Difficulty

Moderate

Type

Manufacturer

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.