OBDHut

OBDHut

P1422

Moderate

Secondary Air Injection Valve Circuit Short To B+

What Does P1422 Mean?

The PCM has detected that the Secondary Air Injection valve control circuit has a short to battery voltage (B+). This causes the valve to receive constant power when it should be PCM-controlled.

Common Causes

40%

Wiring harness damaged and contacting power source

Wiring Harness
Wire Insulation

25%

Failed SAI valve solenoid with internal short to power

SAI Valve
SAI Solenoid

20%

Control module internal driver circuit shorted high

SAI Control Module
PCM

15%

Connector terminal cross-contamination or melted housing

Connector Housing
Connector Terminals

Diagnostic Steps

1

Step 1: Disconnect SAI valve connector and measure voltage at harness side control wire with key on - should read 0V unless PCM commands activation

2

Step 2: If voltage present with valve disconnected, inspect harness routing for contact with hot wires or battery voltage sources

3

Step 3: Check for voltage at PCM connector terminal for SAI valve control - voltage present with valve disconnected indicates PCM fault

4

Step 4: Test SAI valve solenoid by applying battery voltage directly - should click and hold; test resistance across terminals

5

Step 5: Repair wiring if harness fault found; replace valve if internal short confirmed; replace control module if driver circuit faulty

Estimated Repair Cost

$150 - $800

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P1422 mean?

The PCM has detected that the Secondary Air Injection valve control circuit has a short to battery voltage (B+). This causes the valve to receive constant power when it should be PCM-controlled.

What causes P1422?

The most common cause of P1422 (Secondary Air Injection Valve Circuit Short To B+) is: Wiring harness damaged and contacting power source

How much does it cost to fix P1422?

Typical repair costs for P1422 range from $150 to $800, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P1422?

Safe to drive with no immediate safety risk. The fault affects emissions control only and may cause SAI pump to run incorrectly or continuously.

How do I diagnose P1422?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P1422 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Emissions Control - Secondary Air Injection

Difficulty

Moderate

Type

Manufacturer

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.