OBDHut

OBDHut

P1184

Critical
Moderate

Linear 02 Sensor / Common Ground Wire Open Circuit

What Does P1184 Mean?

The common ground wire for the linear (wide-band) oxygen sensors has an open circuit. This affects all sensors sharing this ground circuit and prevents proper air/fuel ratio control and emissions monitoring.

Safety Warning

Vehicle may run poorly with reduced power and fuel economy. Safe to drive short distances but should be repaired promptly.

Common Causes

45%

Broken or corroded common ground wire connection

O2 sensor ground wire
Ground connection point

30%

Failed ground terminal or connector at ECM or chassis

Ground connector
ECM connector pins

15%

Damaged wiring harness from corrosion or physical damage

Wiring harness
Ground wire

10%

Poor ground connection due to rust or paint at mounting point

Ground stud
Chassis ground point

Diagnostic Steps

1

Step 1: Locate and inspect the common ground wire connection point for O2 sensors (typically at engine block or chassis)

2

Step 2: Test continuity from each O2 sensor ground pin back to ECM ground and battery negative

3

Step 3: Check for voltage drop across ground circuit while sensors are operating (should be less than 0.1V)

4

Step 4: Inspect all ground terminals and connections for corrosion, looseness, or damage

5

Step 5: Clean or repair ground connection points, replace damaged wiring as necessary

Estimated Repair Cost

$75 - $300

Parts + labor, varies by vehicle and location

Frequently Asked Questions

What does P1184 mean?

The common ground wire for the linear (wide-band) oxygen sensors has an open circuit. This affects all sensors sharing this ground circuit and prevents proper air/fuel ratio control and emissions monitoring.

What causes P1184?

The most common cause of P1184 (Linear 02 Sensor / Common Ground Wire Open Circuit) is: Broken or corroded common ground wire connection

How much does it cost to fix P1184?

Typical repair costs for P1184 range from $75 to $300, depending on the vehicle, location, and whether you do it yourself or go to a shop.

Is it safe to drive with P1184?

Vehicle may run poorly with reduced power and fuel economy. Safe to drive short distances but should be repaired promptly.

How do I diagnose P1184?

Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P1184 to identify the root cause.

OBDHut Mobile App

Scan codes directly from your car with the OBDHut app.

Coming Soon

Quick Info

Category

Powertrain

System

Fuel System and Emissions Control

Difficulty

Moderate

Type

Manufacturer

Recommended Tools

OBD2 Scanner

A quality scan tool helps you read codes, view live data, and clear faults.