What Does P0B90 Mean?
The battery management system has detected a general malfunction in hybrid battery voltage sense circuit "R." This circuit monitors the voltage of a specific cell group or module within the high-voltage battery pack, and the signal is absent, incorrect, or otherwise not functioning within normal parameters.
Common Causes
35%
Open or damaged voltage sense wire between battery module "R" and the battery management controller
30%
Corroded or disconnected connector at battery module "R" voltage tap
20%
Failed battery management controller input channel for circuit "R"
15%
Degraded battery cell causing out-of-range voltage reading
Diagnostic Steps
1
Step 1: Access hybrid battery voltage data via scan tool and identify the reading for cell group "R" — compare against adjacent groups for significant deviation.
2
Step 2: With the HV system safely de-energized, inspect the voltage sense harness connector at module "R" for damage, corrosion, or backed-out pins.
3
Step 3: Measure continuity of the sense wire from the battery management controller connector pin to the module "R" terminal.
4
Step 4: Check for short circuits between the sense wire and chassis ground, and between the sense wire and adjacent circuits.
5
Step 5: If wiring checks pass, perform manufacturer-specific battery management controller diagnostics to rule out internal controller failure.
Estimated Repair Cost
$150 - $3,500
Parts + labor, varies by vehicle and location
The battery management system has detected a general malfunction in hybrid battery voltage sense circuit "R." This circuit monitors the voltage of a specific cell group or module within the high-voltage battery pack, and the signal is absent, incorrect, or otherwise not functioning within normal par...
The most common cause of P0B90 (Hybrid Battery Voltage Sense "R" Circuit) is: Open or damaged voltage sense wire between battery module "R" and the battery management controller
Typical repair costs for P0B90 range from $150 to $3,500, depending on the vehicle, location, and whether you do it yourself or go to a shop.
The vehicle may limit power output or prevent EV mode operation. Have the system inspected promptly to ensure safe battery monitoring.
Start by connecting an OBD2 scanner to read the code and any freeze frame data. Then follow the diagnostic steps specific to P0B90 to identify the root cause.
OBDHut Mobile App
Scan codes directly from your car with the OBDHut app.
Coming Soon
Quick Info
Category
Powertrain
System
Hybrid Battery Pack / High-Voltage System
Difficulty
Type
Generic (SAE)
Recommended Tools
OBD2 Scanner
A quality scan tool helps you read codes, view live data, and clear faults.
